-

Upgrade Your Porsche 981 Cayman Base/S/T/GTS/GT4 2014-2016 & 981 Boxster Base/S/T/GTS/Spyder 2014-2016 & 718 Cayman Base/S/T/GTS/GT4/GT4RS 2017-2024 & 718 Boxster Base/S/T/GTS/Spyder/SpyderRS 2017-2024 & 991 991.1 911 Carerra Base/S/T/4/4S/Targa 4/ Targa 4S/GTS/Turbo/Turbo S/GT3/GT3RS 2012-2016 & 991 991.2 911 Carerra Base/S/T/4/4S/Targa 4/ Targa 4S/GTS/Turbo/Turbo SGT3/GT3RS/GT2RS 2017-2019 (Fitment for GT4RS/SpydeRS/GT3RS/GT2RS will block cooling vent) with Aftermarket Parts - GT2RS Carbon Fiber & FRP Hood Bonnet from CMST Tuning

Product Information

Vehicle Make	Porsche
Vehicle Model & Chassis	981 Cayman Base/S/T/GTS/GT4 2014-2016 981 Boxster Base/S/T/GTS/Spyder 2014-2016 718 Cayman Base/S/T/GTS/GT4/GT4RS 2017-2024 718 Boxster Base/S/T/GTS/Spyder/SpyderRS 2017-2024 991 991.1 911 Carerra Base/S/T/4/4S/Targa 4/ Targa 4S/GTS/Turbo/Turbo S/GT3/GT3RS 2012-2016 991 991.2 911 Carerra Base/S/T/4/4S/Targa 4/ Targa 4S/GTS/Turbo/Turbo SGT3/GT3RS/GT2RS 2017-2019 (Fitment for GT4RS/SpydeRS/GT3RS/GT2RS will block cooling vent)
Vehicle Body Type	2 Door Coupe 2 Door Convertible 2 Door Targa
Brand	CMST Tuning
Product Category	Hood
Installation Method	Replacement with OEM mounting points.
Professional Installation Recommendation	Professional installation recommended.
Installation Guide	Call in for instructions.
Package Content	Hood Bonnet x1 (1 pcs)
Material Options	Full FRP： - Top side: FRP with Matte Black Primed Unpainted Finish - Underside: FRP with Matte Black Unpainted Finish Vacuumed Carbon： - Real Vacuumed Carbon Fiber with UV Protection Clearcoat Double-sided Vacuumed Carbon： - Top side: Carbon Fiber with UV Protection Clearcoat - Underside: Carbon Fiber with Matte Finish
Carbon Pattern Options	Woven Carbon (default option) / Forged Carbon (20% extra charge, made to order) / Honeycomb Carbon (20% extra charge, made to order) *To place order for other bespoke or creative options, please email or call in.
Finish Options	Gloss Finish (default option) / Matte Finish (10% extra charge, made to order)
Estimate Installation Hours	2 Hours
Additional Information	for Hoods, Trunk Lids Product, unless stated otherwise, may require re-use of some factory parts for a complete installation

About CMST Tuning

CMST Tuning uses Grade A one-piece carbon fiber sheets with a Fiberglass Reinforced Plastic (FRP) skeleton for strength and durability (except on dry carbon products, since it is not needed). Because CMST Tuning uses one-piece sheets, so you will not see any broken lines or patterns. Rather, all you will notice is just one big consistent weave pattern. In addition to this, all CMST Tuning products use a strong clear coat finish. Clear coats are shiny and durable, and they give you the nice "wet" look as opposed to a duller look from gel coats. Lastly, all of CMST Tuning's carbon sheets are built into the mold, so they do not break and split like the ones where carbon is only wrapped around the skeleton.

Important Information:

-All CMST Tuning products come with a 6-month limited clear coat warranty.
CMST Tuning Parts, unless stated otherwise, may require re-use of some factory parts for a complete installation (for example, trunk lids, hoods for some applications will require re-using the factory license plate garnish)
To avoid pre-mature aging, it is important to keep your carbon fiber product clean. Minimize exposure to the sun, and wax when necessary. This is especially important for dry carbon products, which are sold RAW and need immediate protection upon receipt.
-For hoods, for legal purpose you may need to purchase some hood pins to ensure your new hood stays closed during high-speed or aggressive driving, even if your CMST Tuning hood features built-in latches.
Professional installation is always recommended if you are unsure of your abilities (make sure they check for fitment before starting the install). In some cases, drilling may be required.
-CMST Tuning parts are either made as " Vacuumed " carbon fiber. Wet carbon fiber has a shiny finish and is smooth. or made as "pre-preg" carbon fiber, is often more pricy but does have a better strength to weight ratio. Pre-preg carbon also has slightly better weave quality, and is less prone to very minor defects.
Carbon fiber doors are strictly for off road and track use only, due to possible safety issues.

Shopping Cart

Language:

Currency:

All

Navigation

Exclusive Distributor For

My Account